- Posts: 59
- Thank you received: 0
Mirror kits
- briano
- Topic Author
- Offline
- Proto Star
Less
More
19 years 3 months ago #15344
by briano
Brian O Leary
Mirror kits was created by briano
Does anyone know where I can get mirror kits so I can make a mirror, I need pitch, grinding powers etc.I will try to order it this week if can.
Brian O Leary
Please Log in or Create an account to join the conversation.
- DaveGrennan
- Offline
- IFAS Astronomer of the Year 2010
Less
More
- Posts: 2707
- Thank you received: 32
19 years 3 months ago #15345
by DaveGrennan
Regards and Clear Skies,
Dave.
J41 - Raheny Observatory.
www.webtreatz.com
Equipment List here
Replied by DaveGrennan on topic Re: Mirror kits
Regards and Clear Skies,
Dave.
J41 - Raheny Observatory.
www.webtreatz.com
Equipment List here
Please Log in or Create an account to join the conversation.
- philiplardner
- Offline
- Red Giant
19 years 3 months ago #15365
by philiplardner
Dave beat me to it! Yes, Galvoptics will cover the lot, including cleaning and aluminising your finished glass. In the meantime, get yourself a copy of "How to Make a Telescope" by Jean Texereau, if you haven't already got it.
Dave - Finished grinding the 14" and am already more than half way through polishing. I have also completed fine grinding / smoothing the three 10 inch blanks, one of which is destined to become a flat. I'm motoring, dude, so get your skates on and let's see your baby finished too!
Phil.
PS - Still have to grind out the other two 10 inch surfaces (convex and concave)
Replied by philiplardner on topic Re: Mirror kits
Galvoptics UK sell everything you need
www.galvoptics.fsnet.co.uk/telescope.htm
Dave beat me to it! Yes, Galvoptics will cover the lot, including cleaning and aluminising your finished glass. In the meantime, get yourself a copy of "How to Make a Telescope" by Jean Texereau, if you haven't already got it.
Dave - Finished grinding the 14" and am already more than half way through polishing. I have also completed fine grinding / smoothing the three 10 inch blanks, one of which is destined to become a flat. I'm motoring, dude, so get your skates on and let's see your baby finished too!
Phil.
PS - Still have to grind out the other two 10 inch surfaces (convex and concave)
Please Log in or Create an account to join the conversation.
Time to create page: 0.128 seconds